• CS65 Digital Reporting Monitor

    CS65 Digital Reporting Monitor

    • Weight (without battery): 9.8 lb (4.4 kg)
    • Length: 15.9" (403 mm)
    • Width: 12.3" (312 mm)
    • Height: 9.9" (251 mm)
    • Power Source: 18V Advanced Lithium Battery or AC Adapter
  • RP 340-C Corded Press Tool

    RP 340-C Corded Press Tool

    • Capacity: 10 - 108 mm
    • : For use with Copper, Steel, Stainless Steel, PEX and Multilayer Tubing
    • Hydraulic Ram Output: 32 kN
    • Weight: 3,53 kg (incl. 230 V Power Adapter)
    • Cable Length: 5 m
  • RP 340-B Battery-Powered Press Tool

    RP 340-B Battery-Powered Press Tool

    • Capacity: 10 - 108 mm
    • : For use with Copper, Steel, Stainless Steel, PEX and Multilayer Tubing
    • Hydraulic Ram Output: 32 kN
    • Weight: 3,2 kg (incl. 18 V Li-Ion Battery)
    • Operating Temperature Range: 15˚F to 122˚F (-10˚C to 50˚C)
  • SeeSnake® CS6 and CS6Pak Digital Recording Monitors

    SeeSnake® CS6 and CS6Pak Digital Recording Monitors

    • Weight (without battery): 3.6 lb (1.6 kg)
    • Length: 14.2" (36 cm)
    • Width: 6.5" (16.5 cm)
    • Height: 5.1" (13.0 cm)
    • Resolution: 640 x 480 (VGA) Color LCD
  • SeeSnake® Compact2 Camera System

    SeeSnake® Compact2 Camera System

    • Weight (without Batteries): 16.6 lb (7.5 kg)
    • Length: 25" (63.5 cm)
    • Width: 14" (35.6 cm)
    • Height: 17" (43.2 cm)
    • Camera Type: 1" (2.5 cm) Self-Leveling
  • Inner Tube Core Barrel Wrench

    Inner Tube Core Barrel Wrench

  • micro LM-400 Advanced Laser Distance Meter

    micro LM-400 Advanced Laser Distance Meter

    • Measuring Accuracy: ± 1/16 inch (±1.5mm)
    • Range: 229 feet (70 m)
    • Measuring Units: inches, feet, meters
    • Angle Range: ± 65°
    • Angle Accuracy: ± 0.5
  • RE 60 Electrical Tool

    RE 60 Electrical Tool

    • 60 kN hydraulic force output to cut Cu/Al cables up to 50 mm diameter, crimp Cu/Alu lugs up to 300 mm² and punch round holes up to 63,5 mm:
    • Automatic ram retraction when cutting and crimping:
    • Nylon straps for greater tool security:
    • Approximate Cycle Time: 5 seconds
    • Service Interval: 32,000 cycles
  • 690-I Hand-Held Power Drive

    690-I Hand-Held Power Drive

    • Capacity: 1/8" - 2" (3mm - 50mm)
    • Weight: 21.1 lbs. ( 9.59 kg) Power Drive Only
    • Size: 24.1 in. (613 mm) L x 4.75 in. (121 mm) W x 8 in. (203mm) L
    • Controls: FORWARD/REVERSE Slide Switch, ON/OFF Two-Step Momentary Contact
    • Gear Head:: Die Cast Aluminum Permanently Greased