Search - All Results
Cleans any closed circuit system efficiently. High performance flow reversal valve allows scale to be removed from both sides. Ideal for descaling boilers, heat exchangers and closed heating systems. Scaling inside of a closed circuit dramatically reduces flow capacity. Features a vertical axis for a higher and more powerful flow.
Model 456 Tri-Bender Share Designed to easily bend three different sizes of soft copper tubing with the same tool. Ideal for plumbing and HVAC applications. A 90° start angle minimizes effort required to form a bend. Handy reference marks indicate the angle for quick bends through 90°. Instruction Sheet
High quality bending performance for stainless steel and other hard tubing such as steel and titanium. Two-stage design allows for in-place bending from 90 ̊ to 180 ̊ without ever crossing handles. Extra long 16" (40 cm) handles increase leverage and roll dies in the bending form reduce force needed.
Designed to bend K and L soft copper tubing to a maximum of 180°. Offset cushion grip handles and a 90° start angle, together with a specially engineered plastic shoe, combine to ease bending effort. Inch and metric sizes. Ordering Information - Metric 7 * This product is both inch and metric.
Flares steel, stainless steel, hard copper and brass tubing - through a wall thickness of 0.035" (0.9 mm). Easy to Use - Ratcheting handle reduces effort required especially in confined areas Durable - Eccentrically mounting, hardened steel flaring cone Smooth Flares - Handle clutch releases when flare is complete to iron and smooth flare
Share Model 345 is a precision designed tool for producing 45° flares in soft copper, brass, aluminum and mild steel tubing. A hardened, smooth cone provides fast, 45° flares either single or double lap. A single clamp screw allows easy clamping and removal of tubing. Parts List 345 Manual Flare Tool Parts List (83.04 KB)
Share The RIDGID Telescoping Basin Wrench makes it easier than ever to work with faucet fittings and retaining nuts when installing and repairing. Built-in, water-resistant LED light provides direct illumination of your work. New body design enables effortless telescoping from 10” to 17”. LED Light With Auto-Shut Off Time For Maximum Battery Life
Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06" (1.5 mm) to a maximum of 180°. Offset cushion grip handles for comfort when forming 180° bends. A 90° start angle and unique oil-absorbing shoe minimize bending effort while forming accurate bends.
Heavy-Duty Offset Pipe Wrenches Share Heavy-Duty Offset Pipe Wrenches feature a jaw opening parallel to the handle and a narrower hook jaw head. Provides easy entry into tight spots. Parts List Heavy-Duty Offset Pipe Wrench Parts List (467.13 KB)
Aluminum Offset Pipe Wrenches Share The RIDGID Aluminum Offset Pipe Wrench features a jaw opening parallel to the handle and a narrower hook jaw head to provide easy entry into tight spots. Ideal for overhead applications. Parts List
Aluminum RapidGrip® Wrenches Share The RIDGID Aluminum RapidGrip is a quick one-handed operation and 35% lighter than cast iron models, makes your jobs move faster. Unique combination heel/hook jaw design aggressively bites the work piece and ensures a secure grip. Parts List Aluminum RapidGrip® Wrench Parts List (35.56 KB)
The Internal Wrench is able to grip onto 1”-2” pipes in situations where you cannot access the outer surface. It can hold closet spuds and bath, basin and sink strainers through 2”. It can be used to install or extract Schedule 40 nipples. The jaws expand by eccentric action and are reversible for various sizes.
RIDGID Basin Wrenches provide fast, one-handed ratcheting that fits into tight spaces like under a sink. Tension plug holds head in any position up to 90° angle. Spring-loaded jaws of forged alloy steel provide fast, one-hand ratcheting. Telescopic shanks on Models 1017 and 1019 quickly adjust for lengths from 10" to 17".
Heavy-Duty End Pipe Wrenches Share End Pipe Wrenches provide a faster, easier way to grip pipe in tight spaces. An ideal wrench for pipe work close to a wall, in tight quarters or in closely spaced parallel lines. Parts List End Pipe Wrench Parts List (105.79 KB)
Heavy-Duty RapidGrip® Wrenches Share RIDGID's RapidGrip quick one-handed operation makes your jobs move faster. The spring-loaded jaw design provides rapid action. Unique combination heel/hook jaw design aggressively bites the work piece and ensures a secure grip. Parts List RapidGrip® Wrench Parts List (127 KB)
Aluminum End Wrenches Share Aluminum End Wrenches are ideal for jobs in tight spaces and over-head applications. Designed for easy access in close parallel lines. Forty percent lighter than heavy-duty wrenches. Parts List
A square cut with minimal burr on either 21 ft (6m) or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe.
The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. Now one person can easily square cut 12" schedule 40 pipe in minutes. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe. Quickly cuts steel pipe with minimal burr.
Share RIDGID® Aluminum Pipe Wrenches provide professional strength in lightweight aluminum. The Aluminum Straight Pipe Wrench offers the same durability and ease-of-use found in all RIDGID heavy-duty wrenches. Parts List Parts List (239.21 KB)
The 238-P is designed to cut up to 8" soil pipe when driven by an impact driver or 4" with the included ratchet. Lightweight - At 13.5 pounds mounting the tool in difficult places is easy. Clean Cut - Two directional operation allows scoring of the pipe for a clean cut. Durable - Patent pending torque limiter helps protect the tool from overloading.
Straight Pipe Wrenches have a sturdy, ductile-iron housing and an I-beam handle with a full floating forged hook jaw, featuring self-cleaning threads with replaceable hook and heel jaws. Maintain a visible gap between the hook jaw shank and the workpiece so both heel and hook jaw teeth can grip properly.
FXP Batteries are offered in two capacities, 4Ah and 8Ah, to provide power to tools that previously could not be cordless. Complete the job at hand anywhere, regardless of whether or not power is nearby. Convenient handle - Carrying handle allows for easy insertion and removal Fuel gauge - Charge level gauge on handle notifies user of the charge level
Thread Cutting Oil Share RIDGID® thread cutting oils are free of chlorine and other halogens, PCBs and heavy metals. Complete material safety data sheet available. Extreme pressure additives for threading machine applications Reduces friction
Ball Transfer Head Share RIDGID's Ball Transfer Head is ideal for use with threading machines, roll grooving, or other pipe working applications. Ideal for use with threading machines, roll grooving, or other pipe working applications. Instruction Sheet Pipe Stand Use Guide (1.38 MB)
Roller Head Pipe Stands Share Rollers center pipe and allow rotation. Locking ring allows for quick vertical height adjustments. Roller Head Pipe Stands are ideal for use with threading machines, roll grooving, or other pipe working applications. Locking ring allows for quick vertical height adjustments. Instruction Sheet Pipe Stand Use Guide (1.38 MB)