Search - All Results
With a SeeSnake FleXmitter 512 Hz you can locate a camera in a line (now standard with all SeeSnake reels: Mini-SeeSnake, SeeSnake Standard and SeeSnake Self-Leveling). If your SeeSnake camera isn’t equipped with a transmitter, you can upgrade your camera with a FleXmitter transmitter. Meets FCC Class A and EN 55022 Class B requirements.
micro HM-100 Temperature Humidity Meter Easy & accurate measurements of air temperature & humidity Dew point and wet-bulb calculation Power Source 9V Battery (included) 4½ Dual Backlit LCD Humidity, Temperature, Dew Point, Wet-Bulb Humidity Range 0% to 100% RH Humidity Accuracy ± 2% RH Temp. Range -30°C – 100°C
The omnidirectional antenna array captures the complete signal field, making it easy to acquire the signal and trace its path for greater speed and accuracy as the gradient antenna pair provides left/right guidance for centering over the signal. This product integrates with RIDGID Connect which is an online website designed for contractors and service providers that will allow you to create and share media-rich reports with your customers that include videos, documents, and pictures often collected from your jobsites.
The NaviTrack Scout Locator is designed to solve the most demanding remote transmitter (sonde) locates using multi-directional locating technology. The NaviTrack Scout multi-directional antenna technology sees the entire signal all of the time. This locator verifies the locate position using a micro-mapping display to mark distinctive poles in front of and behind the target, insuring an accurate locate.
The innovative Chain Lock provides extended safety, easily absorbing high pressures and preventing slipping from the fitting. These are the best companions to your Press Machine you can have on the jobsite! Industrial Applications - Press connections up to 108 mm in a single press cycle, without use of a 2nd Actuator.
Simply push the measurement button to turn on the ultra-sharp Class II lasers, point the device at the spot to be measured, and push the measurement button. This rugged, compact, portable instrument enables professional tradesman to quickly determine distances for piping, measuring trouble spots down the line, and quickly determine spacing for code compliance. Adjustable units enable you to quickly read feet, inches or meters on the fly.
Connect to a smartphone or tablet to overlay measurements on a photo or sketch to share with others. RIDGID Sketch is a tool for mobile devices that allows you to calculate and communicate measurements of your project. RIDGID Sketch works in both drawing mode and photo overlay mode allowing you to develop precise room plans or annotate measurements within a photo.
Make pressed connections from 42 to 108 mm copper or stainless steel tube or 63 mm on Multilayer pipe. These rings ensure Pipe repairs and installations in hard-to-reach spaces. Join pipes in seconds with the Standard Series Press Rings and Actuator Jaw. Designed for maximum accessibility when pressing pipe in more confined spots.
Cable features a "speed bump" that prevents the cable from accidentally coming out of the drum. The bulb auger burrows directly into the center of the blockage improving its ability to break up or retrieve the debris. The lightweight design and grip handle provide user comfort and stability while cleaning, allowing you to rest the handle directly on the sink counter.
The RIDGID SeekTech ST-305R is a compact yet powerful multi-frequency transmitter tool. With its battery shoe, the ST-305R can be powered by a Li-Ion 18 V rechargeable battery or six alkaline or NiMH C-cell batteries. Provides flexible power options of either a Lithium-Ion 18V rechargeable battery or 6 C-cell alkaline batteries
The RIDGID® SeekTech® Locator 18 V Adaptor provides a versatile power option which could reduce long term battery costs. Attach the adaptor to the SeekTech SR-20, SR-24, or NaviTrack Scout to enable long-lasting use. The adaptor easily fits into the alkaline battery cavity, providing a flexible power option. Provides a versatile power option which could reduce long term battery costs
Featuring a double molded water-resistant (1m) IP67 housing, the micro DM-100 is also drop-proof and perfectly suitable for use in the harshest jobsite conditions. The micro DM-100 is supplied in a soft carrying case with double-molded test leads, Type K temperature probe and a 9V battery.
SeekTech ST-510 Line Transmitter Share The SeekTech ST-510 Line Transmitter lets you energize metallic lines for tracing with a locator. LCD display provides instant visual feedback on line resistance and current flow. Ten watts of fully variable power output LCD display provides instant visual feedback on line resistance and current flow
SeekTech ST-305 Line Transmitter The RIDGID 5 Watt SeekTech ST-305 Line Transmitter lets you energize metallic lines for tracing and can transmit two frequencies simultaneously. Audio feedback confirms a good circuit before beginning a trace. Lightweight and compact transmitter that delivers up to 5 watts of power. Can transmit two frequencies simultaneously.
The innovative Chain Lock provides extended safety, easily absorbing high pressures and preventing slipping from the fitting. All RIDGID Jaws & Rings are developed and manufactured in Switzerland and Germany to the highest standards and in close cooperation with Fitting Manufacturers. These are the best companions to your Press Machine you can have on the jobsite!
Use the standard series press actuator to make pressed connections from 42 to 108 mm copper or stainless steel tube or 63 mm on Multilayer pipe with the standard series press tools. These rings ensure Pipe repairs and installations in hard-to-reach spaces. Designed for maximum accessibility when pressing pipe in more confined spots.
Registration is quick and easy and the app provides valuable real-time data on your phone or tablet. This product integrates with RIDGID Connect which is an online website designed for contractors and service providers that will allow you to create and share media-rich reports with your customers that include videos, documents, and pictures often collected from your jobsites.
US Forgot Password? Enter your user name below, click Submit, and an email will be sent to the address on your account containing a link to a page where you can change your password.
Share 6 mm camera head, nearly one-third the size of the standard camera head. Enables detailed inspections in very confined spaces. 4 LED lights provide clear images. Fully flexible cables for easy navigation. Sleek aluminum construction withstands demanding applications. Compatible with: RIDGID® micro CA-350, micro CA-150, micro CA-100, micro CA-300, microEXPLORER and SeeSnake® micro systems.* Customers Also Viewed
US Forgot User Name? Enter your email address, click Submit, and your user name will be emailed to the address associated with your account.
Create an Account Must be at least 6 characters.
With its rugged and compact design, the handle can be attached to the cutter and operated in ratchet steps as small as 10 degrees. Featuring the 2-in-1 Close Quarters Cutter where the cutter can be used alone or with the ratchet handle, a light and ergonomic accessory to help use the cutter in tight and restricted spaces.
Convert a 300 Power Drive to a portable threading machine. Ideal for use with RIDGID roll groovers. Capacity 1/8" - 2" (6mm - 50mm) Pipe, 2 1/2" - 4" (65mm - 100mm) with 141, and 4" - 6" (100mm-150mm) with 161 Geared Threaders, 1/4" - 2" (6mm - 52mm) Rod Heavy-duty forward/off/reverse and integral foot switch. Chuck RIDGID speed chuck with replaceable rocker-action jaws. Rear Centering Device Cam-action turns with chuck. Support Bars
The innovative Chain Lock provides extended safety, easily absorbing high pressures and preventing slipping from the fitting. All RIDGID Jaws & Rings are developed and manufactured in Switzerland and Germany to the highest standards and in close cooperation with Fitting Manufacturers. These are the best companions to your Press Machine you can have on the jobsite!
Digital self-leveling extends the life of the camera head and minimizes service-related downtime by removing mechanical wear components. Removing these parts eliminates the friction that wears on the camera head over time while also achieving consistently upright, clear visuals that speed up every inspection. The Mini Pro is designed to navigate hard 90° bends and inspect up to 61 m (200') with a rugged 25 mm camera head and mid-flex push cable.