Search - All Results
FlexShaft cable is spun by attaching your cordless drill to the input shaft on the housing. As the cable spins, the chain knocker attached will expand to provide wall-to-wall pipe cleaning. The chain knocker expands to the pipe's inside diameter to contact and clean the entire wall surface efficiently.
Cable Control System - causes the drum to stop spinning when the blade becomes lodged in a blockage, limits potential for cable to flip-over in the drum and helps to indicate to operator when blockages are encountered. It features an integrated transport cart with large wheels and a folding handle for easy movement and compact operation.
When cable hits blockage, motor gears down automatically to deliver more power and enhance operator control. Requires minimal set-up to clean sink lines, floor drains and roof vents. The drum tilt adjusts for proper cable feed angle. Cable drum quick-release and built-in hand-holds allow easy cable change and transport.
With a capacity range of 2"-24" diameter pipe, the 920 has the largest capacity of any RIDGID roll groover. Transportation Mode – Detachable wheels enable one man to easily move the 920 around a jobsite. Built-in Pressure Gauge – Helps operator monitor hydraulic pressure to control flare and optimize groove time.
The highly flexible, lightweight hose blasts through sludge, soap and grease blockages. As you pull the hose back, it power washes the line, flushing debris away and restoring drain lines to their full, free-flowing capacity. Portable - The cart with heavy wheels rolls the jetter to the job site with the greatest ease
RIDGID 18V Lithium Batteries maximize tool uptime keeping you working on the job even longer. Passive convection cooling (no fan) design to prevent over-heating Car charging capability with d.c. charging cord Provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing 5.0 Ah battery keeps you working on the job even longer
The powerful, compact and versatile new PowerClear™ drain cleaner effortlessly cleans tub, shower or sink blockages from 3/4" (20mm) to 2" (40mm) diameter. Its lightweight design makes it easy to maneuver in small spaces like under a sink. TWO-PIECE GUIDE HOSE - Use one piece for close applications and extension for areas where access is limited.
Remote Transmitter (512 Hz Sonde) Share Can be attached to a drain cleaning cable or a water jet hose to locate the remote transmitter in a line. Flashing LED indicates that sonde is transmitting. Meets FCC Class B and EN 55022 Class B requirements. Operator's Manual
Some packaged options include adapters and cable kits while others do not, so confirm the exact parts included when ordering. With the switch OFF, pull about 10" (250 mm) of cable from the adapter and slide it into the back of the K-50. Test braking by engaging the clutch to spin the drum, then releasing the clutch; the drum should stop immediately.
Faster setup and cleanup, quick cleaning, and cordless convenience make for additional time saving. Set the drill in screw driving mode so the clutch functions, and begin with a low clutch setting around 25% of the range. How do I install and adjust the chain knocker? Select the correct knocker for pipe size and application, ensure proper setup and adjustment, and begin with conservative clutch settings.
What chain tools and knocker accessories come with the K9-204, how do I adjust the knocker, and what do I need for cutting roots? Chain knockers expand to the pipe ID to break blockages and clean pipe walls, and carbide-tipped options are available for tougher deposits. The machine allows simultaneous camera use so you can inspect while cleaning for faster, verifiable results.
One man can easily clean the heaviest blockages – indoors or out. The finest all-around sewer and drain cleaning machine. High-speed cleaning gets the job done faster and better. Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 600 RPM Release handle, cable stops instantly. Wheels to the job site – sets up fast, cleans up fast.
Powerful, yet quiet, 4/10 HP universal motor and gearbox bear down as cutter engages tough obstructions. Inner-drum and ball bearing distributor arm work with motor and gearbox system to reduce chance of cable flip-over inside the drum. Two position stair climber eases transport and loading – to eliminate extra cost for loading wheels.
What drain sizes and cable lengths does the K-46 support? It uses the RIDGID 18V RB-18XX battery platform and a brushless DC motor with 0–560 RPM no-load speed. Features include a 360° AUTOFEED for advancing and retrieving cable, a cable lock for manual work, an enclosed rotating drum, an integrated kickstand, and a work light.
A compact machine for institutional, commercial or residential cleaning. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages. Rear handle allows for easy transporting up ladders and onto rooftops. Remove only two bolts to access jaw set for cleaning or replacement. Removal of same bolts provides access to belt drive.
Two-piece twist lock canister with interchangeable inner drum - Makes cable change-out simple; easy to match the right cable for the job. Inner drum prevents water leaks and greatly reduces cable flip-over inside the drum. Vinyl-wrapped inner core to prevent core from rusting to spring – enhances cable life.
The RIDGID RP 350 features a brushless motor that is capable of over 100,000 press cycles and requires no scheduled maintenance. With the most advanced LED interface and lighting, the RP 350 has been upgraded from top to bottom. Brushless Motor Technology combined with an advanced hydraulic system allows the RP 350 to reach over 100K press cycles without requiring any scheduled maintenance during its lifetime.
Omnidirectional Antennas - Capture the complete signal field for faster signal acquisition and more accurate utility locating. This product integrates with RIDGID Connect which is an online website designed for contractors and service providers that will allow you to create and share media-rich reports with your customers that include videos, documents, and pictures often collected from your jobsites.
RIDGID's 12V advanced lithium batteries and chargers provide superior performance and battery life with built in protection against short circuiting and overcharge protection. Charge time for 12V Advanced Lithium 2.5Ah is 40 minutes. Provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing
Corded Power Adapter Share RIDGID 230V Power Adapter provides you full power address for your Press Tools . Compatible with RIDGID Pressing Range: RP350, RP 351, RP 352-XL, RP 219, RP340, RE6, RE600, RE60, ... Compatible with the RIDGID Underground Inspection Range: SeeSnake Monitors CS65xr, CS12x, CS6x Versa, CSx VIA, and legacy models. FULL POWER ACCESS - Power Adapters lets your work for as long as you want. CONVENIENT - Offers 5m long power cord
With a SeeSnake FleXmitter 512 Hz you can locate a camera in a line (now standard with all SeeSnake reels: Mini-SeeSnake, SeeSnake Standard and SeeSnake Self-Leveling). If your SeeSnake camera isn’t equipped with a transmitter, you can upgrade your camera with a FleXmitter transmitter. Meets FCC Class A and EN 55022 Class B requirements.
The NaviTrack Scout Locator is designed to solve the most demanding remote transmitter (sonde) locates using multi-directional locating technology. Wet or damp ground affects line tracing more than sonde detection; locating the inline sonde is generally less affected by surface moisture. Locating through cast iron or through concrete with rebar is more challenging and will reduce signal strength and depth accuracy, so expect weaker reads and shorter effective depth in those conditions.
The SeekTech SR-20 Locator is a lightweight yet rugged receiver that provides all the information needed for faster, more accurate locates. Target line and guidance arrows quickly identify distortion. Trace any frequency from 10 Hz to 35 kHz. The SR-20 is a lightweight, rugged utility line locator with omnidirectional and gradient antennas that trace frequencies from 10 Hz to 35 kHz, providing continuous depth and intuitive mapping for underground cables and pipes.
It can clamp around cables up to 30 mm O.D. and measure current up to 1000A AC/DC. Besides measuring AC/DC Current, the micro CM-100 can also be used as a Multimeter for 8 other functions and will provide clear and accurate readings on its large Backlit LCD. The slim and double-molded design provides easy one-handed operation and can be conveniently used in confined cable compartments.
Brushless Motor Technology combined with an advanced hydraulic system allows the RP 351 to reach over 100K press cycles without requiring any scheduled maintenance during its lifetime. Not 1 but 12 LED lights effectively light up the darkest jobsite environments. Registration is quick and easy and the app provides valuable real-time data on your phone or tablet.