Search - All Results
Faster setup and cleanup, quick cleaning, and cordless convenience make for additional time saving. This upgraded version has latches around the perimeter to provide easy access to the inside of the machine, an improved cable clamp for increased cable protection, and on-board hex key storage. Increased Productivity - Faster setup and cleanup, quick cleaning, cordless convenience and easy to transport
A compact machine for institutional, commercial or residential cleaning. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages. Rear handle allows for easy transporting up ladders and onto rooftops. Remove only two bolts to access jaw set for cleaning or replacement. Removal of same bolts provides access to belt drive.
The K-1000 Rodder Machine is a rugged, compact drain cleaning machine suited for straight main line work in municipalities, universities, institutions and industry. Equipped with a 6 HP gasoline engine and forward/reverse transmission. Rod rotates at 133 RPM in forward and reverse at full throttle. Returns engine speed to idle and disengages clutch when operator releases throttle. Adjustable torque limiter minimizes kinking of rods and excessive torque through transmission system.
A full range of chain knockers and accessories are available. This upgraded version has latches around the perimeter to provide easy access to the inside of the machine, an improved cable clamp for increased cable protection, and on-board hex key storage. Increased Productivity - Faster setup and cleanup, quick cleaning, cordless convenience and easy to transport
The highly flexible, lightweight hose blasts through sludge, soap and grease blockages. As you pull the hose back, it power washes the line, flushing debris away and restoring drain lines to their full, free-flowing capacity. Portable - The cart with heavy wheels rolls the jetter to the job site with the greatest ease
The K-50 Sectional Machine is the perfect all-around sink, shower and floor drain tool. Uses sections of 5/8” (16 mm) cable, cleans 1 ¼” to 4” (32-110 mm) lines up to 100 feet. Weighs less than 40 lbs (18 kg). Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 400 RPM. Release handle, cable stops instantly.
Powerful, yet quiet, 4/10 HP universal motor and gearbox bear down as cutter engages tough obstructions. Inner-drum and ball bearing distributor arm work with motor and gearbox system to reduce chance of cable flip-over inside the drum. Two position stair climber eases transport and loading – to eliminate extra cost for loading wheels.
The drum tilt adjusts for proper cable feed angle. When cable hits blockage, motor gears down automatically to deliver more power and enhance operator control. Requires minimal set-up to clean sink lines, floor drains and roof vents. Cable drum quick-release and built-in hand-holds allow easy cable change and transport.
Simply squeeze the trigger and point the ultra-sharp dual class II lasers at the surface being measured. Adjustable Emissivity to accurately measure the temperature of virtually any surface. Audible and Visual High and Low Alarms quickly alert you to temperatures outside of the ranges that you set. Bright Backlit Display which can be toggled on in poorly lit areas.
Two-piece twist lock canister with interchangeable inner drum - Makes cable change-out simple; easy to match the right cable for the job. Inner drum prevents water leaks and greatly reduces cable flip-over inside the drum. Vinyl-wrapped inner core to prevent core from rusting to spring – enhances cable life.
With adjustable sensitivity, even low-levels of gases can be detected in seconds. It ensures proper gas line installations, checks for maintenance and repair needs and quickly pinpoints combustible gas leaks. Adjustable sensitivity settings provide precise leak locating with the touch of a button. Field replaceable sensor means more up-time and less time waiting for repairs.
Designed with ergonomics and versatility at its core, the K-46 features an integrated, multi-position kickstand for support, a 360-degree rotatable AUTOFEED® that advances and retrieves the cable in forward and reverse, an enclosed rotating drum, and compatibility with different cable sizes and cable tools for unmatched convenience. Ergonomic - Integrated, multi-position kickstand alleviates the weight of the tool in common work environments, such as under cramped sinks and in tubs for improved comfort and support
micro HM-100 Temperature Humidity Meter Easy & accurate measurements of air temperature & humidity Dew point and wet-bulb calculation Power Source 9V Battery (included) 4½ Dual Backlit LCD Humidity, Temperature, Dew Point, Wet-Bulb Humidity Range 0% to 100% RH Humidity Accuracy ± 2% RH Temp. Range -30°C – 100°C
One man can easily clean the heaviest blockages – indoors or out. The finest all-around sewer and drain cleaning machine. High-speed cleaning gets the job done faster and better. Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 600 RPM Release handle, cable stops instantly. Wheels to the job site – sets up fast, cleans up fast.
The K-750 Drum Machine is a powerful, self-contained drain cleaning machine ideal for lateral lines. Tough, corrosion-resistant cable drum withstands harsh treatment and abuse. It will not dent or corrode and cleans easily. AUTOFEED control advances and retrieves cable with a push of a lever, up to 20' (6 m) per minute. Transport wheels ease loading into service truck/van.
Cable Control System - causes the drum to stop spinning when the blade becomes lodged in a blockage, limits potential for cable to flip-over in the drum and helps to indicate to operator when blockages are encountered. Reverse the direction of the AUTOFEED and the cable feeds back into the drum.
It can clamp around cables up to 30 mm O.D. and measure current up to 1000A AC/DC. Besides measuring AC/DC Current, the micro CM-100 can also be used as a Multimeter for 8 other functions and will provide clear and accurate readings on its large Backlit LCD. The slim and double-molded design provides easy one-handed operation and can be conveniently used in confined cable compartments.
Corded Power Adapter Share RIDGID 230V Power Adapter provides you full power address for your Press Tools . Compatible with RIDGID Pressing Range: RP350, RP 351, RP 352-XL, RP 219, RP340, RE6, RE600, RE60, ... Compatible with the RIDGID Underground Inspection Range: SeeSnake Monitors CS65xr, CS12x, CS6x Versa, CSx VIA, and legacy models. FULL POWER ACCESS - Power Adapters lets your work for as long as you want. CONVENIENT - Offers 5m long power cord
The RIDGID SeekTech Inductive Clamp allows users to apply a signal to a cable or pipe when direct connection is not possible. Additionally compatible with any comparable line transmitter which has a 10 watt or less maximum output power if frequency is under 45 kHz, and a 1 watt maximum if above 45 kHz
The RIDGID® SeekTech® Locator 18 V Adaptor provides a versatile power option which could reduce long term battery costs. Attach the adaptor to the SeekTech SR-20, SR-24, or NaviTrack Scout to enable long-lasting use. The adaptor easily fits into the alkaline battery cavity, providing a flexible power option. Provides a versatile power option which could reduce long term battery costs
SeekTech ST-305 Line Transmitter The RIDGID 5 Watt SeekTech ST-305 Line Transmitter lets you energize metallic lines for tracing and can transmit two frequencies simultaneously. Audio feedback confirms a good circuit before beginning a trace. Lightweight and compact transmitter that delivers up to 5 watts of power. Can transmit two frequencies simultaneously.
Connect to a smartphone or tablet to overlay measurements on a photo or sketch to share with others. RIDGID Sketch is a tool for mobile devices that allows you to calculate and communicate measurements of your project. RIDGID Sketch works in both drawing mode and photo overlay mode allowing you to develop precise room plans or annotate measurements within a photo.
Featuring a double molded water-resistant (1m) IP67 housing, the micro DM-100 is also drop-proof and perfectly suitable for use in the harshest jobsite conditions. The micro DM-100 is supplied in a soft carrying case with double-molded test leads, Type K temperature probe and a 9V battery.
RIDGID 18V Lithium Batteries maximize tool uptime keeping you working on the job even longer. Passive convection cooling (no fan) design to prevent over-heating Car charging capability with d.c. charging cord Provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing 5.0 Ah battery keeps you working on the job even longer
RIDGID's 12V advanced lithium batteries and chargers provide superior performance and battery life with built in protection against short circuiting and overcharge protection. Charge time for 12V Advanced Lithium 2.5Ah is 40 minutes. Provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing