Features

  • A compact machine for institutional, commercial or residential cleaning. Also ideal for septic tank vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages.
  • Ideal for rooftop vent stacks. Rear handle allows for easy transporting up ladders and onto rooftops.
  • Unique, easy-to-use, instant-acting cable clutch maximizes operator control. Push handle down, cable spins at 600 RPM. Release handle, cable stops instantly.
  • Simple adjustment knob allows unit to spin both 7/8" (22 mm) and 5/8" (16 mm) diameter cable. Adjusts in seconds.
  • 7⁄8" (22 mm) cable (C-10) cleans 2" (50 mm) to 6" (150 mm) lines through 150 feet (46 m).
  • 5⁄8" (16 mm) cable (C-7, C-8, C-9) cleans 11⁄4" (32 mm) to 4" (110 mm) lines through 125 feet (38 m).
  • Remove only two bolts to access jaw set for cleaning or replacement. Removal of same bolts provides access to belt drive.
  • Equipped with 700 W motor.
  • Includes A-1 RIDGID® drain cleaning mitt and operator’s manual.

Ordering Information

{{model}}
Catalog Number Model No. Description Voltage (V) Weight
lb. kg
66467 K-60SP  Machine with RIDGID Drain Cleaning Mitt, A-12 Pin Key, and A-60-12 Rear Guide Hose  220  43  19.50 
66472 K-60SP-SE  Machine with RIDGID Drain Cleaning Mitt, A12 Pin Key, and A-60-12 Rear Guide Hose, plus: A-61 Tool Kit, A-62 Cable Kit  220  107  48.50 
66477 K-60 SE A30  Machine with RIDGID Drain Cleaning Mitt, A-60-12 Rear Guide Hose, plus: A-61 Tool Kit, A-62 Cable Kit, A-30 Cable Kit.  220  127  57.50 
94497 K-60SP -SE-A25  Machine with RIDGID Drain Cleaning Mitt, A-61 Tool kit, A-62 cable kit, A-25 cable & tools kit  220  123  56.00 
Cables and Leaders
{{model}}
Catalog Number Model No. Description Weight
lb. kg
25036 C-10 PC  7/8" (22 mm) x 15' Cable with Inner Core (4,6 m)
 
10  4.50 
25046 C-8IC  5/8” (16mm) x 7.5’ (2.3m) Inner Core Cable   3 1/2  1.60 
30007 T-127  7⁄8" (22 mm) Trap Leader  0.90 
51317 C-9  5/8" (16 mm) x 10' (3,1 m) Heavy- Duty Wind  2.20 
62265 C-7  5/8" (16 mm) x 7 1/2' (2,3 m) Tight-Wind  1.80 
62270 C-8  5/8" (16 mm) x 7 1/2' (2,3 m) All-Purpose Wind  1.40 
62275 C-10  7/8" (22 m) x 15' (4,6 m) All- Purpose Wind   9 1/2  4.30 
Cable Kits and Tool Kit
{{model}}
Catalog Number Model No. Description Weight
lb. kg
61625 A-61  Standard Equipment Tool Kit for K-60-SE, includes: –T-101 Straight Auger –T-102 Funnel Auger –T-107 Spade Cutter –T-125 Retrieving Auger –T-150-1 Sharktooth Cutter –A-3 Tool Box –A-12 Pin Key  43  19.50 
61630 A-62  Standard Equipment Cable Kit for K-60-SE, includes: – Five Sections C-10, 7⁄8" (22 mm) x 15' (4,6 m) Cable – A-8 Cable Carrier  3.60 
59365 A-30  T-201 Straight Auger T-202 Bulb Auger T-205 “C” Cutter T-211 Spade Cutter A-13 Coupling Pin Key A-10 Cable Carrier A-14-6 Rear Guide Hose A-1 Left-Hand RIDGID Drain Cleaning Mitt   20  9.10 
94492 A-25  5⁄8" (16 mm) Cable Kit, includes: Five Sections C-8, 5⁄8" (16 mm) x 7 1⁄2" (2,3 m) Cable 37.5' (11,5 m) –A-10 Cable Carrier –T-201 Straight Auger –T-202 Bulb Auger –T-205 “C” Cutter –A-13 Coupling Pin Key  18  8.20 
Accessories
{{model}}
Catalog Number Model No. Description Weight
lb. kg
59205 A-1  Left-Hand RIDGID Drain Cleaning Mitt  1/2  0.20 
59230 A-13  3/8" Cable Pin Key  1/2  0.20 
59295 A-2  Right-Hand RIDGID Drain Cleaning Mitt  1/2  0.20 
59360 A-3  Tool Box  2.30 
59445 A-5  Grease Gun  1/2  0.20 
61615 A-60-12  12' (3,7 m) Rear Guide Hose For K-60  12  5.50 
59210 A-10  Cable Carrier Holds 90' (27 m) C-8, C-9  3 1/4  1.50 
59425 A-36  Cable Caddy  15  6.80 
59225 A-12  1/2" Cable Pin Key  1/2  0.20 
59470 A-8  Cable Carrier 60' (18 m) Capacity 1 1/4" (32 mm)  5 1/2  2.50 
65687   Clutch Jaw  3/4  0.30 
76575 A-60-15  15' (4,6 m) Rear Guide Hose For K-60  15 1/2  7.00 
Tools- Fits 7/8" Sectional Cables
{{model}}
Catalog Number Model No. Description Weight
lb. kg
27642 T-125  Straight Retrieving Auger 
62850 T-101  Straight Auger 
62855 T-102  Funnel Auger 
62860 T-103  Sawtooth Cutter, 2 1⁄2" (65 mm) 
62865 T-104  "H” Cutter, 2 1⁄2" (65 mm) 
62870 T-105  Grease Cutter, 2 1⁄2" (65 mm) 
62875 T-106  Grease Cutter, 3 1⁄2" (87 mm) 
62915 T-109  Spiral Sawtooth Cutter, 1 1⁄2" (45 mm) 
62920 T-110  Spiral Sawtooth Cutter, 2 1⁄4" (57 mm) 
62925 T-111  Spiral Sawtooth Cutter, 3" (75 mm) 
62930 T-112  4-Blade Cutter, 1 3⁄4" (45 mm) 
62935 T-113  4-Blade Cutter, 3" (75 mm) 
62940 T-114  Chain Knocker for 4" lines 
98050 T-150  Sharktooth Cutter 3" (75 mm) and 4" (110 mm) 
98055 T-150-1  Sharktooth Cutter 3" (75 mm) Blade 
98060 T-150-2  Sharktooth Cutter 4" (110 mm) Blade 
62880 T-107  Spade Cutter, 1 3⁄4" (45 mm) 
54842 T-141  Knife Blade Cutter 1 1⁄2" (40 mm) 
54852R T-142  Knife Blade Cutter 2 1⁄2" (65 mm)