Search - All Results
It also designed to manually roll groove in-place pipe. Whether you're doing machine-powered or manual grooving, the AutoTracking gauge keeps the pipe automatically engaged to the groover throughout the grooving process. Less Hand Force Required - When manually roll grooving, the 975's 55% higher gear reduction means less hand force required versus competitive manual roll groovers.
One man can easily clean the heaviest blockages – indoors or out. The finest all-around sewer and drain cleaning machine. High-speed cleaning gets the job done faster and better. Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 600 RPM Release handle, cable stops instantly. Wheels to the job site – sets up fast, cleans up fast.
Sink/Sectional Cables Customers Also Viewed Ordering Information 5/16" (8 mm) Cables Catalog No. Model No. Cable Description 5/16" (8 mm) x 25' (7.6 m) w/ Bulb Auger 5/16" (8 mm) x 25' (7.6 m) Inner Core w/ Bulb Auger 5/16" (8 mm) x 50' (15,2 m) w/ Bulb Auger
Drum Cables Drain Cleaner Cable Tools (1.31 MB) Customers Also Viewed Ordering Information Sink Drum Cables Catalog No. Model No. Cable Description 1/4” (6 mm) x 25’ (7,6 m) w/ Funnel Auger 1/4” (6 mm) x 35’ (10,7 m) w/ Funnel Auger 5/16” (8 mm) x 25’ (7,6 m) Inner Core w/ Bulb Auger
RIDGID offers a wide variety of cutters and augers to clean everything from grease to root blockages. Straight Auger - For use in exploring and breaking up stoppages or returning sample to surface to determine correct tool. Hook Auger - For heavy and dense root stoppages in pipes that require hooking and breaking up. Spade Cutter - For following up after augers have been used and to open up floor drains.
With a capacity range of 2"-24" diameter pipe, the 920 has the largest capacity of any RIDGID roll groover. Transportation Mode – Detachable wheels enable one man to easily move the 920 around a jobsite. Built-in Pressure Gauge – Helps operator monitor hydraulic pressure to control flare and optimize groove time.
RIDGID offers a wide variety of cutters and augers to clean everything from grease to root blockages. Hook Auger - For heavy and dense root stoppages in pipes that require hooking and breaking up. Spade Cutter - For following up after augers have been used and to open up floor drains. Chain Knocker - For use when vigorous action is required for cleaning of scale in pipes and boiler tubes.
As you pull the hose back, it power scrubs the line flushing debris away, restoring drain lines to their full, free-flowing capacity. The jetter is easily removed from the cart in seconds for hard to reach drains, indoor applications or remote storage. Reduced number of fittings, hoses and parts minimizes leaks and down time – keeping you on the job.
The highly flexible, lightweight hose blasts through sludge, soap and grease blockages. As you pull the hose back, it power washes the line, flushing debris away and restoring drain lines to their full, free-flowing capacity. Portable - The cart with heavy wheels rolls the jetter to the job site with the greatest ease
A compact machine for institutional, commercial or residential cleaning. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages. Rear handle allows for easy transporting up ladders and onto rooftops. Remove only two bolts to access jaw set for cleaning or replacement. Removal of same bolts provides access to belt drive.
RIDGID 18V Lithium Batteries maximize tool uptime keeping you working on the job even longer. Passive convection cooling (no fan) design to prevent over-heating Car charging capability with d.c. charging cord Provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing 5.0 Ah battery keeps you working on the job even longer
Two-piece twist lock canister with interchangeable inner drum - Makes cable change-out simple; easy to match the right cable for the job. Inner drum prevents water leaks and greatly reduces cable flip-over inside the drum. Vinyl-wrapped inner core to prevent core from rusting to spring – enhances cable life.
The K-50 Sectional Machine is the perfect all-around sink, shower and floor drain tool. Uses sections of 5/8” (16 mm) cable, cleans 1 ¼” to 4” (32-110 mm) lines up to 100 feet. Weighs less than 40 lbs (18 kg). Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 400 RPM. Release handle, cable stops instantly.
The powerful, compact and versatile new PowerClear™ drain cleaner effortlessly cleans tub, shower or sink blockages from 3/4" (20mm) to 2" (40mm) diameter. Its lightweight design makes it easy to maneuver in small spaces like under a sink. TWO-PIECE GUIDE HOSE - Use one piece for close applications and extension for areas where access is limited.
RIDGID's 12V advanced lithium batteries and chargers provide superior performance and battery life with built in protection against short circuiting and overcharge protection. Charge time for 12V Advanced Lithium 2.5Ah is 40 minutes. Provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing
The RIDGID RP 350 features a brushless motor that is capable of over 100,000 press cycles and requires no scheduled maintenance. With the most advanced LED interface and lighting, the RP 350 has been upgraded from top to bottom. Brushless Motor Technology combined with an advanced hydraulic system allows the RP 350 to reach over 100K press cycles without requiring any scheduled maintenance during its lifetime.
Simply squeeze the trigger and point the ultra-sharp dual class II lasers at the surface being measured. Adjustable Emissivity to accurately measure the temperature of virtually any surface. Audible and Visual High and Low Alarms quickly alert you to temperatures outside of the ranges that you set. Bright Backlit Display which can be toggled on in poorly lit areas.
With adjustable sensitivity, even low-levels of gases can be detected in seconds. It ensures proper gas line installations, checks for maintenance and repair needs and quickly pinpoints combustible gas leaks. Adjustable sensitivity settings provide precise leak locating with the touch of a button. Field replaceable sensor means more up-time and less time waiting for repairs.
The RIDGID SeekTech Inductive Clamp allows users to apply a signal to a cable or pipe when direct connection is not possible. Additionally compatible with any comparable line transmitter which has a 10 watt or less maximum output power if frequency is under 45 kHz, and a 1 watt maximum if above 45 kHz
The SeekTech SR-20 Locator is a lightweight yet rugged receiver that provides all the information needed for faster, more accurate locates. Target line and guidance arrows quickly identify distortion. Trace any frequency from 10 Hz to 35 kHz. Proximity signal and signal strength help work through difficult locates. Four size C, alkaline batteries provide approximately 10 to 15 hours.
micro HM-100 Temperature Humidity Meter Easy & accurate measurements of air temperature & humidity Dew point and wet-bulb calculation Power Source 9V Battery (included) 4½ Dual Backlit LCD Humidity, Temperature, Dew Point, Wet-Bulb Humidity Range 0% to 100% RH Humidity Accuracy ± 2% RH Temp. Range -30°C – 100°C
Connect to a smartphone or tablet to overlay measurements on a photo or sketch to share with others. RIDGID Sketch is a tool for mobile devices that allows you to calculate and communicate measurements of your project. RIDGID Sketch works in both drawing mode and photo overlay mode allowing you to develop precise room plans or annotate measurements within a photo.
The RIDGID® SeekTech® Locator 18 V Adaptor provides a versatile power option which could reduce long term battery costs. Attach the adaptor to the SeekTech SR-20, SR-24, or NaviTrack Scout to enable long-lasting use. The adaptor easily fits into the alkaline battery cavity, providing a flexible power option. Provides a versatile power option which could reduce long term battery costs
It can clamp around cables up to 30 mm O.D. and measure current up to 1000A AC/DC. Besides measuring AC/DC Current, the micro CM-100 can also be used as a Multimeter for 8 other functions and will provide clear and accurate readings on its large Backlit LCD. The slim and double-molded design provides easy one-handed operation and can be conveniently used in confined cable compartments.
Featuring a double molded water-resistant (1m) IP67 housing, the micro DM-100 is also drop-proof and perfectly suitable for use in the harshest jobsite conditions. The micro DM-100 is supplied in a soft carrying case with double-molded test leads, Type K temperature probe and a 9V battery.