K-60 Sectional Machine
For 1 1/4" to 6" (32-150mm) Drain Lines
Read More
Features
- A compact machine for institutional, commercial or residential cleaning. Also ideal for septic tank vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages.
- Ideal for rooftop vent stacks. Rear handle allows for easy transporting up ladders and onto rooftops.
- Unique, easy-to-use, instant-acting cable clutch maximizes operator control. Push handle down, cable spins at 600 RPM. Release handle, cable stops instantly.
- Simple adjustment knob allows unit to spin both 7/8" (22 mm) and 5/8" (16 mm) diameter cable. Adjusts in seconds.
- 7⁄8" (22 mm) cable (C-10) cleans 2" (50 mm) to 6" (150 mm) lines through 150 feet (46 m).
- 5⁄8" (16 mm) cable (C-7, C-8, C-9) cleans 11⁄4" (32 mm) to 4" (110 mm) lines through 125 feet (38 m).
- Remove only two bolts to access jaw set for cleaning or replacement. Removal of same bolts provides access to belt drive.
- Equipped with 960 W motor.
- Includes A-1 RIDGID® drain cleaning mitt and operator’s manual.
Support Documents
Parts List
K-60 Sectional Machine Parts List
(345.16 KB)
Operator's Manual
Manual K60 - 999997050-B.pdf
(1.27 MB)
Brochure
Ordering Information
| Catalog Number | Model No. | Description | Voltage (V) | Weight | |
|---|---|---|---|---|---|
| lb. | kg | ||||
| 66467 | K-60SP | Machine with RIDGID Drain Cleaning Mitt, A-12 Pin Key, and A-60-12 Rear Guide Hose | 220 | 43 | 19.50 |
| 66472 | K-60SP-SE | Machine with RIDGID Drain Cleaning Mitt, A12 Pin Key, and A-60-12 Rear Guide Hose, plus: A-61 Tool Kit, A-62 Cable Kit | 220 | 107 | 48.50 |
| 66477 | K-60 SE A30 | Machine with RIDGID Drain Cleaning Mitt, A-60-12 Rear Guide Hose, plus: A-61 Tool Kit, A-62 Cable Kit, A-30 Cable Kit. | 220 | 127 | 57.50 |
| 94497 | K-60SP -SE-A25 | Machine with RIDGID Drain Cleaning Mitt, A-61 Tool kit, A-62 cable kit, A-25 cable & tools kit | 220 | 123 | 56.00 |
Cables and Leaders
| Catalog Number | Model No. | Description | Weight | |
|---|---|---|---|---|
| lb. | kg | |||
| 25036 | C-10 PC |
7/8" (22 mm) x 15' Cable with Inner Core (4,6 m) |
10 | 4.50 |
| 25046 | C-8IC | 5/8” (16mm) x 7.5’ (2.3m) Inner Core Cable | 3 1/2 | 1.60 |
| 30007 | T-127 | 7⁄8" (22 mm) Trap Leader | 2 | 0.90 |
| 51317 | C-9 | 5/8" (16 mm) x 10' (3,1 m) Heavy- Duty Wind | 5 | 2.20 |
| 62265 | C-7 | 5/8" (16 mm) x 7 1/2' (2,3 m) Tight-Wind | 4 | 1.80 |
| 62270 | C-8 | 5/8" (16 mm) x 7 1/2' (2,3 m) All-Purpose Wind | 3 | 1.40 |
| 62275 | C-10 | 7/8" (22 m) x 15' (4,6 m) All- Purpose Wind | 9 1/2 | 4.30 |
Cable Kits and Tool Kit
| Catalog Number | Model No. | Description | Weight | |
|---|---|---|---|---|
| lb. | kg | |||
| 61625 | A-61 | Standard Equipment Tool Kit for K-60-SE, includes: –T-101 Straight Auger –T-102 Funnel Auger –T-107 Spade Cutter –T-125 Retrieving Auger –T-150-1 Sharktooth Cutter –A-3 Tool Box –A-12 Pin Key | 43 | 19.50 |
| 61630 | A-62 | Standard Equipment Cable Kit for K-60-SE, includes: – Five Sections C-10, 7⁄8" (22 mm) x 15' (4,6 m) Cable – A-8 Cable Carrier | 8 | 3.60 |
| 59365 | A-30 | T-201 Straight Auger T-202 Bulb Auger T-205 “C” Cutter T-211 Spade Cutter A-13 Coupling Pin Key A-10 Cable Carrier A-14-6 Rear Guide Hose A-1 Left-Hand RIDGID Drain Cleaning Mitt | 20 | 9.10 |
| 94492 | A-25 | 5⁄8" (16 mm) Cable Kit, includes: Five Sections C-8, 5⁄8" (16 mm) x 7 1⁄2" (2,3 m) Cable 37.5' (11,5 m) –A-10 Cable Carrier –T-201 Straight Auger –T-202 Bulb Auger –T-205 “C” Cutter –A-13 Coupling Pin Key | 18 | 8.20 |
Accessories
| Catalog Number | Model No. | Description | Weight | |
|---|---|---|---|---|
| lb. | kg | |||
| 59205 | A-1 | Left-Hand RIDGID Drain Cleaning Mitt | 1/2 | 0.20 |
| 59230 | A-13 | 3/8" Cable Pin Key | 1/2 | 0.20 |
| 59295 | A-2 | Right-Hand RIDGID Drain Cleaning Mitt | 1/2 | 0.20 |
| 59360 | A-3 | Tool Box | 5 | 2.30 |
| 59445 | A-5 | Grease Gun | 1/2 | 0.20 |
| 61615 | A-60-12 | 12' (3,7 m) Rear Guide Hose For K-60 | 12 | 5.50 |
| 59210 | A-10 | Cable Carrier Holds 90' (27 m) C-8, C-9 | 3 1/4 | 1.50 |
| 59425 | A-36 | Cable Caddy | 15 | 6.80 |
| 59225 | A-12 | 1/2" Cable Pin Key | 1/2 | 0.20 |
| 59470 | A-8 | Cable Carrier 60' (18 m) Capacity 1 1/4" (32 mm) | 5 1/2 | 2.50 |
| 65687 | Clutch Jaw | 3/4 | 0.30 | |
| 76575 | A-60-15 | 15' (4,6 m) Rear Guide Hose For K-60 | 15 1/2 | 7.00 |
Tools- Fits 7/8" Sectional Cables
| Catalog Number | Model No. | Description | Weight | |
|---|---|---|---|---|
| lb. | kg | |||
| 27642 | T-125 | Straight Retrieving Auger | - | - |
| 62850 | T-101 | Straight Auger | - | - |
| 62855 | T-102 | Funnel Auger | - | - |
| 62860 | T-103 | Sawtooth Cutter, 2 1⁄2" (65 mm) | - | - |
| 62865 | T-104 | "H” Cutter, 2 1⁄2" (65 mm) | - | - |
| 62870 | T-105 | Grease Cutter, 2 1⁄2" (65 mm) | - | - |
| 62875 | T-106 | Grease Cutter, 3 1⁄2" (87 mm) | - | - |
| 62915 | T-109 | Spiral Sawtooth Cutter, 1 1⁄2" (45 mm) | - | - |
| 62920 | T-110 | Spiral Sawtooth Cutter, 2 1⁄4" (57 mm) | - | - |
| 62925 | T-111 | Spiral Sawtooth Cutter, 3" (75 mm) | - | - |
| 62930 | T-112 | 4-Blade Cutter, 1 3⁄4" (45 mm) | - | - |
| 62935 | T-113 | 4-Blade Cutter, 3" (75 mm) | - | - |
| 62940 | T-114 | Chain Knocker for 4" lines | - | - |
| 98050 | T-150 | Sharktooth Cutter 3" (75 mm) and 4" (110 mm) | - | - |
| 98055 | T-150-1 | Sharktooth Cutter 3" (75 mm) Blade | - | - |
| 98060 | T-150-2 | Sharktooth Cutter 4" (110 mm) Blade | - | - |
| 62880 | T-107 | Spade Cutter, 1 3⁄4" (45 mm) | - | - |
| 54842 | T-141 | Knife Blade Cutter 1 1⁄2" (40 mm) | - | - |
| 54852R | T-142 | Knife Blade Cutter 2 1⁄2" (65 mm) | - | - |