Search - All Results
FlexShaft cable is spun by attaching your cordless drill to the input shaft on the housing. As the cable spins, the chain knocker attached will expand to provide wall-to-wall pipe cleaning. The chain knocker expands to the pipe's inside diameter to contact and clean the entire wall surface efficiently.
Some packaged options include adapters and cable kits while others do not, so confirm the exact parts included when ordering. With the switch OFF, pull about 10" (250 mm) of cable from the adapter and slide it into the back of the K-50. Test braking by engaging the clutch to spin the drum, then releasing the clutch; the drum should stop immediately.
The K-750 Drum Machine is a powerful, self-contained drain cleaning machine ideal for lateral lines. Tough, corrosion-resistant cable drum withstands harsh treatment and abuse. It will not dent or corrode and cleans easily. AUTOFEED control advances and retrieves cable with a push of a lever, up to 20' (6 m) per minute. Transport wheels ease loading into service truck/van.
When cable hits blockage, motor gears down automatically to deliver more power and enhance operator control. Requires minimal set-up to clean sink lines, floor drains and roof vents. The drum tilt adjusts for proper cable feed angle. Cable drum quick-release and built-in hand-holds allow easy cable change and transport.
Powerful, yet quiet, 4/10 HP universal motor and gearbox bear down as cutter engages tough obstructions. Inner-drum and ball bearing distributor arm work with motor and gearbox system to reduce chance of cable flip-over inside the drum. Two position stair climber eases transport and loading – to eliminate extra cost for loading wheels.
Cable Control System - causes the drum to stop spinning when the blade becomes lodged in a blockage, limits potential for cable to flip-over in the drum and helps to indicate to operator when blockages are encountered. It features an integrated transport cart with large wheels and a folding handle for easy movement and compact operation.
Cable features a "speed bump" that prevents the cable from accidentally coming out of the drum. The bulb auger burrows directly into the center of the blockage improving its ability to break up or retrieve the debris. The lightweight design and grip handle provide user comfort and stability while cleaning, allowing you to rest the handle directly on the sink counter.
Corded Power Adapter Share RIDGID 230V Power Adapter provides you full power address for your Press Tools . Compatible with RIDGID Pressing Range: RP350, RP 351, RP 352-XL, RP 219, RP340, RE6, RE600, RE60, ... Compatible with the RIDGID Underground Inspection Range: SeeSnake Monitors CS65xr, CS12x, CS6x Versa, CSx VIA, and legacy models. FULL POWER ACCESS - Power Adapters lets your work for as long as you want. CONVENIENT - Offers 5m long power cord
RIDGID 18V Lithium Batteries maximize tool uptime keeping you working on the job even longer. Passive convection cooling (no fan) design to prevent over-heating Car charging capability with d.c. charging cord Provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing 5.0 Ah battery keeps you working on the job even longer
The innovative Chain Lock provides extended safety, easily absorbing high pressures and preventing slipping from the fitting. These are the best companions to your Press Machine you can have on the jobsite! Industrial Applications - Press connections up to 108 mm in a single press cycle, without use of a 2nd Actuator.
RIDGID's 12V advanced lithium batteries and chargers provide superior performance and battery life with built in protection against short circuiting and overcharge protection. Charge time for 12V Advanced Lithium 2.5Ah is 40 minutes. Provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing
Connect to a smartphone or tablet to overlay measurements on a photo or sketch to share with others. RIDGID Sketch is a tool for mobile devices that allows you to calculate and communicate measurements of your project. RIDGID Sketch works in both drawing mode and photo overlay mode allowing you to develop precise room plans or annotate measurements within a photo.
Simply push the measurement button to turn on the ultra-sharp Class II lasers, point the device at the spot to be measured, and push the measurement button. This rugged, compact, portable instrument enables professional tradesman to quickly determine distances for piping, measuring trouble spots down the line, and quickly determine spacing for code compliance. Adjustable units enable you to quickly read feet, inches or meters on the fly.
Make pressed connections from 42 to 108 mm copper or stainless steel tube or 63 mm on Multilayer pipe. These rings ensure Pipe repairs and installations in hard-to-reach spaces. Join pipes in seconds with the Standard Series Press Rings and Actuator Jaw. Designed for maximum accessibility when pressing pipe in more confined spots.
Simply squeeze the trigger and point the ultra-sharp dual class II lasers at the surface being measured. Adjustable Emissivity to accurately measure the temperature of virtually any surface. Audible and Visual High and Low Alarms quickly alert you to temperatures outside of the ranges that you set. Bright Backlit Display which can be toggled on in poorly lit areas.
{{filteredImages().indexOf(gallerySelectedImage) + 1}}/{{filteredImages().length}} micro HM-100 Temperature Humidity Meter Easy & accurate measurements of air temperature & humidity Dew point and wet-bulb calculation Power Source 9V Battery (included) 4½ Dual Backlit LCD Humidity, Temperature, Dew Point, Wet-Bulb Humidity Range 0% to 100% RH Humidity Accuracy ± 2% RH
It can clamp around cables up to 30 mm O.D. and measure current up to 1000A AC/DC. Besides measuring AC/DC Current, the micro CM-100 can also be used as a Multimeter for 8 other functions and will provide clear and accurate readings on its large Backlit LCD. The slim and double-molded design provides easy one-handed operation and can be conveniently used in confined cable compartments.
Brushless Motor Technology combined with an advanced hydraulic system allows the RP 351 to reach over 100K press cycles without requiring any scheduled maintenance during its lifetime. Not 1 but 12 LED lights effectively light up the darkest jobsite environments. Registration is quick and easy and the app provides valuable real-time data on your phone or tablet.
With a SeeSnake FleXmitter 512 Hz you can locate a camera in a line (now standard with all SeeSnake reels: Mini-SeeSnake, SeeSnake Standard and SeeSnake Self-Leveling). If your SeeSnake camera isn’t equipped with a transmitter, you can upgrade your camera with a FleXmitter transmitter. Meets FCC Class A and EN 55022 Class B requirements.
Featuring a double molded water-resistant (1m) IP67 housing, the micro DM-100 is also drop-proof and perfectly suitable for use in the harshest jobsite conditions. The micro DM-100 is supplied in a soft carrying case with double-molded test leads, Type K temperature probe and a 9V battery.
With adjustable sensitivity, even low-levels of gases can be detected in seconds. It ensures proper gas line installations, checks for maintenance and repair needs and quickly pinpoints combustible gas leaks. Adjustable sensitivity settings provide precise leak locating with the touch of a button. Field replaceable sensor means more up-time and less time waiting for repairs.
The RIDGID RP 350 features a brushless motor that is capable of over 100,000 press cycles and requires no scheduled maintenance. With the most advanced LED interface and lighting, the RP 350 has been upgraded from top to bottom. Brushless Motor Technology combined with an advanced hydraulic system allows the RP 350 to reach over 100K press cycles without requiring any scheduled maintenance during its lifetime.
Remote Transmitter (512 Hz Sonde) Share Can be attached to a drain cleaning cable or a water jet hose to locate the remote transmitter in a line. Flashing LED indicates that sonde is transmitting. Meets FCC Class B and EN 55022 Class B requirements. Operator's Manual
The RIDGID® SeekTech® Locator 18 V Adaptor provides a versatile power option which could reduce long term battery costs. Attach the adaptor to the SeekTech SR-20, SR-24, or NaviTrack Scout to enable long-lasting use. The adaptor easily fits into the alkaline battery cavity, providing a flexible power option. Provides a versatile power option which could reduce long term battery costs
The RIDGID SeekTech Inductive Clamp allows users to apply a signal to a cable or pipe when direct connection is not possible. Additionally compatible with any comparable line transmitter which has a 10 watt or less maximum output power if frequency is under 45 kHz, and a 1 watt maximum if above 45 kHz