Search - All Results
RIDGID 18V Lithium Batteries maximize tool uptime keeping you working on the job even longer. Passive convection cooling (no fan) design to prevent over-heating Car charging capability with d.c. charging cord Provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing 5.0 Ah battery keeps you working on the job even longer
K-5208 Sectional Machine Transport Cart - Obsolete The K-5208 Sectional Machine Transport Cart has been discontinued and we are no longer producing this product. The K-5208 Sectional Machine, service parts, and accessories are still available. Please see the K-5208 Sectional Machine page for more information. Instruction Sheet
A compact machine for institutional, commercial or residential cleaning. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages. Rear handle allows for easy transporting up ladders and onto rooftops. Remove only two bolts to access jaw set for cleaning or replacement. Removal of same bolts provides access to belt drive.
The drum tilt adjusts for proper cable feed angle. When cable hits blockage, motor gears down automatically to deliver more power and enhance operator control. Requires minimal set-up to clean sink lines, floor drains and roof vents. Cable drum quick-release and built-in hand-holds allow easy cable change and transport.
The K-50 Sectional Machine is the perfect all-around sink, shower and floor drain tool. Uses sections of 5/8” (16 mm) cable, cleans 1 ¼” to 4” (32-110 mm) lines up to 100 feet. Weighs less than 40 lbs (18 kg). Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 400 RPM. Release handle, cable stops instantly.
The RIDGID RP 350 features a brushless motor that is capable of over 100,000 press cycles and requires no scheduled maintenance. With the most advanced LED interface and lighting, the RP 350 has been upgraded from top to bottom. Brushless Motor Technology combined with an advanced hydraulic system allows the RP 350 to reach over 100K press cycles without requiring any scheduled maintenance during its lifetime.
It can clamp around cables up to 30 mm O.D. and measure current up to 1000A AC/DC. Besides measuring AC/DC Current, the micro CM-100 can also be used as a Multimeter for 8 other functions and will provide clear and accurate readings on its large Backlit LCD. The slim and double-molded design provides easy one-handed operation and can be conveniently used in confined cable compartments.
micro HM-100 Temperature Humidity Meter Easy & accurate measurements of air temperature & humidity Dew point and wet-bulb calculation Power Source 9V Battery (included) 4½ Dual Backlit LCD Humidity, Temperature, Dew Point, Wet-Bulb Humidity Range 0% to 100% RH Humidity Accuracy ± 2% RH Temp. Range -30°C – 100°C
Simply push the measurement button to turn on the ultra-sharp Class II lasers, point the device at the spot to be measured, and push the measurement button. This rugged, compact, portable instrument enables professional tradesman to quickly determine distances for piping, measuring trouble spots down the line, and quickly determine spacing for code compliance. Adjustable units enable you to quickly read feet, inches or meters on the fly.
Connect to a smartphone or tablet to overlay measurements on a photo or sketch to share with others. RIDGID Sketch is a tool for mobile devices that allows you to calculate and communicate measurements of your project. RIDGID Sketch works in both drawing mode and photo overlay mode allowing you to develop precise room plans or annotate measurements within a photo.
SeekTech ST-510 Line Transmitter Share The SeekTech ST-510 Line Transmitter lets you energize metallic lines for tracing with a locator. LCD display provides instant visual feedback on line resistance and current flow. Ten watts of fully variable power output LCD display provides instant visual feedback on line resistance and current flow
The RIDGID SeekTech Inductive Clamp allows users to apply a signal to a cable or pipe when direct connection is not possible. Additionally compatible with any comparable line transmitter which has a 10 watt or less maximum output power if frequency is under 45 kHz, and a 1 watt maximum if above 45 kHz
The RIDGID SeekTech ST-305R is a compact yet powerful multi-frequency transmitter tool. With its battery shoe, the ST-305R can be powered by a Li-Ion 18 V rechargeable battery or six alkaline or NiMH C-cell batteries. Provides flexible power options of either a Lithium-Ion 18V rechargeable battery or 6 C-cell alkaline batteries
Featuring a double molded water-resistant (1m) IP67 housing, the micro DM-100 is also drop-proof and perfectly suitable for use in the harshest jobsite conditions. The micro DM-100 is supplied in a soft carrying case with double-molded test leads, Type K temperature probe and a 9V battery.
Remote Transmitter (512 Hz Sonde) Share Can be attached to a drain cleaning cable or a water jet hose to locate the remote transmitter in a line. Flashing LED indicates that sonde is transmitting. Meets FCC Class B and EN 55022 Class B requirements. Operator's Manual
The NaviTrack Scout Locator is designed to solve the most demanding remote transmitter (sonde) locates using multi-directional locating technology. The NaviTrack Scout multi-directional antenna technology sees the entire signal all of the time. This locator verifies the locate position using a micro-mapping display to mark distinctive poles in front of and behind the target, insuring an accurate locate.
SeekTech ST-305 Line Transmitter The RIDGID 5 Watt SeekTech ST-305 Line Transmitter lets you energize metallic lines for tracing and can transmit two frequencies simultaneously. Audio feedback confirms a good circuit before beginning a trace. Lightweight and compact transmitter that delivers up to 5 watts of power. Can transmit two frequencies simultaneously.
With a SeeSnake FleXmitter 512 Hz you can locate a camera in a line (now standard with all SeeSnake reels: Mini-SeeSnake, SeeSnake Standard and SeeSnake Self-Leveling). If your SeeSnake camera isn’t equipped with a transmitter, you can upgrade your camera with a FleXmitter transmitter. Meets FCC Class A and EN 55022 Class B requirements.
The omnidirectional antenna array captures the complete signal field, making it easy to acquire the signal and trace its path for greater speed and accuracy as the gradient antenna pair provides left/right guidance for centering over the signal. This product integrates with RIDGID Connect which is an online website designed for contractors and service providers that will allow you to create and share media-rich reports with your customers that include videos, documents, and pictures often collected from your jobsites.
The innovative Chain Lock provides extended safety, easily absorbing high pressures and preventing slipping from the fitting. These are the best companions to your Press Machine you can have on the jobsite! Industrial Applications - Press connections up to 108 mm in a single press cycle, without use of a 2nd Actuator.
US Forgot User Name? Enter your email address, click Submit, and your user name will be emailed to the address associated with your account.
Use the standard series press actuator to make pressed connections from 42 to 108 mm copper or stainless steel tube or 63 mm on Multilayer pipe with the standard series press tools. These rings ensure Pipe repairs and installations in hard-to-reach spaces. Designed for maximum accessibility when pressing pipe in more confined spots.
Cable features a "speed bump" that prevents the cable from accidentally coming out of the drum. The bulb auger burrows directly into the center of the blockage improving its ability to break up or retrieve the debris. The lightweight design and grip handle provide user comfort and stability while cleaning, allowing you to rest the handle directly on the sink counter.
Make pressed connections from 42 to 108 mm copper or stainless steel tube or 63 mm on Multilayer pipe. These rings ensure Pipe repairs and installations in hard-to-reach spaces. Join pipes in seconds with the Standard Series Press Rings and Actuator Jaw. Designed for maximum accessibility when pressing pipe in more confined spots.
Easily record still images and videos of problems in hard-to-reach areas and save these on the internal memory (235 MB) or the included 8GB SD-card. Comfortable pistol-grip design, large screen and rugged anodized aluminium camera head with four bright LEDs make it easy to detect and diagnose the unreachable.