Search - All Results
When cable hits blockage, motor gears down automatically to deliver more power and enhance operator control. Requires minimal set-up to clean sink lines, floor drains and roof vents. The drum tilt adjusts for proper cable feed angle. Cable drum quick-release and built-in hand-holds allow easy cable change and transport.
One man can easily clean the heaviest blockages – indoors or out. The finest all-around sewer and drain cleaning machine. High-speed cleaning gets the job done faster and better. Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 600 RPM Release handle, cable stops instantly. Wheels to the job site – sets up fast, cleans up fast.
K-1500G Sectional Machine - Obsolete K-1500G Sectional Machine - Obsolete The K-1500G has been discontinued and we are no longer producing this machine. Service parts and accessories are still available. Machine Dimensions Parts List
One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster and better. The finest all-around sewer and drain cleaning machine. Wheels to the job site – sets up fast, cleans up fast. Low-profile “B” frame design will fit most crawl spaces. Loads and unloads from truck easily.
Power meets portability as this machine is 35% lighter and 71% smaller than previous RIDGID sectional drain cleaners. Clear 2 inch to 8 inch (50 - 200 mm) drain lines faster and cleaner with the K-5208. Efficient in-field clutch serviceability to minimize down time when maintenance is needed. Sectional cable carrier improves loading and unloading cables while delivering a cleaner solution.
K-5208 Sectional Machine Transport Cart - Obsolete The K-5208 Sectional Machine Transport Cart has been discontinued and we are no longer producing this product. The K-5208 Sectional Machine, service parts, and accessories are still available. Please see the K-5208 Sectional Machine page for more information. Instruction Sheet
Some packaged options include adapters and cable kits while others do not, so confirm the exact parts included when ordering. With the switch OFF, pull about 10" (250 mm) of cable from the adapter and slide it into the back of the K-50. Test braking by engaging the clutch to spin the drum, then releasing the clutch; the drum should stop immediately.
Lightweight Hose - Hose with nylon braid provides significant weight reduction and increased flexibility – all without reducing strength. Simply rotate the hose reel forward to gain full access to the engine’s gas tank and air filter. Reduced number of fittings, hoses and parts minimizes leaks and downtime – keeping you on the job.
What drain sizes and cable lengths does the K-46 support? It uses the RIDGID 18V RB-18XX battery platform and a brushless DC motor with 0–560 RPM no-load speed. Features include a 360° AUTOFEED for advancing and retrieving cable, a cable lock for manual work, an enclosed rotating drum, an integrated kickstand, and a work light.
The highly flexible, lightweight hose blasts through sludge, soap and grease blockages. As you pull the hose back, it power washes the line, flushing debris away and restoring drain lines to their full, free-flowing capacity. Portable - The cart with heavy wheels rolls the jetter to the job site with the greatest ease
As you pull the hose back, it power scrubs the line flushing debris away, restoring drain lines to their full, free-flowing capacity. The jetter is easily removed from the cart in seconds for hard to reach drains, indoor applications or remote storage. Reduced number of fittings, hoses and parts minimizes leaks and down time – keeping you on the job.
Clean - Cable contained inside guide hose to minimize cleanup of hands, work areas and fixtures. Aluminum paddles advance cable 20% faster. MAXCORE® 50 Cable - Includes 1/4" x 30' (6 mm x 9 m) Inner core cable for increased strength and longer life. Provides 50% more cleaning power for tough blockages.
Two-piece twist lock canister with interchangeable inner drum - Makes cable change-out simple; easy to match the right cable for the job. Inner drum prevents water leaks and greatly reduces cable flip-over inside the drum. Vinyl-wrapped inner core to prevent core from rusting to spring – enhances cable life.
The K-60SP is a compact drain cleaning machine that's portable enough to carry up a ladder, yet powerful enough to unclog tough blockages. Rear handle allows for easy transporting up ladders and onto rooftops. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages. Remove only two bolts to access jaw set for cleaning or replacement.
As you pull the hose back, it power scrubs the line, flushing debris away and restoring drain lines to their free-flowing capacity. This powerful water jetter propels a highly flexible hose through 1 1/4" to 4" (32 to 100mm) lines–blasting through sludge, soap and grease blockages. The jetter is easily removed from the cart in seconds for hard to reach drain or for remote storage.
This jetter propels a highly flexible hose through 1 1/4" to 4" (32 mm to 100 mm) lines–blasting through sludge, soap and grease blockages. As you pull the hose back, it power scrubs the line, flushing debris away and restoring drain lines to their free-flowing capacity. Jetter and hose reel are easily removed from the cart in seconds for hard to reach drains or remote storage.
The RIDGID SeekTech Inductive Clamp allows users to apply a signal to a cable or pipe when direct connection is not possible. Additionally compatible with any comparable line transmitter which has a 10 watt or less maximum output power if frequency is under 45 kHz, and a 1 watt maximum if above 45 kHz
RIDGID's 12V advanced lithium batteries and chargers provide superior performance and battery life with built in protection against short circuiting and overcharge protection. Charge time for 12V Advanced Lithium 2.5Ah is 40 minutes. Provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing
RIDGID 18V Lithium Batteries maximize tool uptime keeping you working on the job even longer. Passive convection cooling (no fan) design to prevent over-heating Car charging capability with d.c. charging cord Provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing 5.0 Ah battery keeps you working on the job even longer
The powerful, compact and versatile new PowerClear™ drain cleaner effortlessly cleans tub, shower or sink blockages from 3/4" (20mm) to 2" (40mm) diameter. Its lightweight design makes it easy to maneuver in small spaces like under a sink. TWO-PIECE GUIDE HOSE - Use one piece for close applications and extension for areas where access is limited.
Corded Power Adapter Share RIDGID 230V Power Adapter provides you full power address for your Press Tools . Compatible with RIDGID Pressing Range: RP350, RP 351, RP 352-XL, RP 219, RP340, RE6, RE600, RE60, ... Compatible with the RIDGID Underground Inspection Range: SeeSnake Monitors CS65xr, CS12x, CS6x Versa, CSx VIA, and legacy models. FULL POWER ACCESS - Power Adapters lets your work for as long as you want. CONVENIENT - Offers 5m long power cord
Omnidirectional Antennas - Capture the complete signal field for faster signal acquisition and more accurate utility locating. This product integrates with RIDGID Connect which is an online website designed for contractors and service providers that will allow you to create and share media-rich reports with your customers that include videos, documents, and pictures often collected from your jobsites.
SeekTech ST-510 Line Transmitter Share The SeekTech ST-510 Line Transmitter lets you energize metallic lines for tracing with a locator. LCD display provides instant visual feedback on line resistance and current flow. Ten watts of fully variable power output LCD display provides instant visual feedback on line resistance and current flow
SeekTech ST-305 Line Transmitter The RIDGID 5 Watt SeekTech ST-305 Line Transmitter lets you energize metallic lines for tracing and can transmit two frequencies simultaneously. Audio feedback confirms a good circuit before beginning a trace. Lightweight and compact transmitter that delivers up to 5 watts of power. Can transmit two frequencies simultaneously.
ProPress® rings permit access in tighter spaces and serve as an excellent complement to your RIDGID® jaw sets. The swivel actuator allows a press tool to be placed +/-90˚ to the tube being pressed! Designed in conjunction with the ProPress system fittings, ensuring total system compatibility. V1 and V2 Kits are designed for use with RIDGID Standard Press Tools (CT-400, 320-E, RP 330-B, RP 330-C, RP 340, or RP 350).