Search - All Results
The 300 Power Drive is available in 115V or 230V single-phase configurations at 50–60 Hz. Power Drive only weight is listed at approximately 94 lb (43 kg). Complete system weight varies by configuration and included accessories. Open the 1206 stand legs and press down the tray until stiff and wobble-free.
Some packaged options include adapters and cable kits while others do not, so confirm the exact parts included when ordering. With the switch OFF, pull about 10" (250 mm) of cable from the adapter and slide it into the back of the K-50. Test braking by engaging the clutch to spin the drum, then releasing the clutch; the drum should stop immediately.
Features an enclosed feed screw to eliminate clogging and jamming, grooved rollers for close-to-flare cuts, and a fold-away reamer. X-CEL Wheel Pin – changes your cutter wheel quickly using a new ball detent design…no tool needed…no lost clips! Spare cutter wheel included in the knob.
Internal Tubing Cutters are for trimming tubing below floor level for shower/floor drain installations, or above the ceiling for sprinkler head installations. Model 106 features a tool steel and aluminum body while 108 and 109P have cast iron bodies. Each model features hardened steel rollers and cutter wheels. Model 109P is equipped to cut PVC or ABS plastic.
RIDGID C-Style cutters cut 15/22 or 28 mm copper tubing while offering unique features that take copper tube cutting to a whole new level. Spring loaded cutter wheel provides a constant pressure on pipe providing fast and straight cuts every time. Unique screwdriver slots in the housing provide the extra leverage for making the cut in extreme tight spaces.
This pipe cutter is designed to cut, clean, ream and deburr copper and stainless steel tubing and fittings quickly and professionally. and possessing a conveniently located carrying handle, the Model 122XL is ideal for transport directly to the job site. Rugged cast aluminum housing and powerful 1/3 HP induction motor assures a long life.
223S/227S Inner-Outer Reamer Share Hardened Steel Construction Inner-Outer Reamer includes 45 cutting edges on interior cone allow for fast, clean, inner reaming and outer deburring/beveling of copper and stainless steel tubing. Hardened steel construction. Dual inch/metric measurement bar.
High quality bending performance for stainless steel and other hard tubing such as steel and titanium. Two-stage design allows for in-place bending from 90 ̊ to 180 ̊ without ever crossing handles. Extra long 16" (40 cm) handles increase leverage and roll dies in the bending form reduce force needed.
Cleans any closed circuit system efficiently. High performance flow reversal valve allows scale to be removed from both sides. Ideal for descaling boilers, heat exchangers and closed heating systems. Scaling inside of a closed circuit dramatically reduces flow capacity. Features a vertical axis for a higher and more powerful flow.
Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06" (1.5 mm) to a maximum of 180°. Offset cushion grip handles for comfort when forming 180° bends. A 90° start angle and unique oil-absorbing shoe minimize bending effort while forming accurate bends.
One Stop Wrench Share The RIDGID One Stop Wrench provides the exact size wrench you need to install angle stops and compression couplings. The One Stop Wrench is two wrenches in one. Open end sizes: 9⁄16" & 15⁄16".
The Internal Wrench is able to grip onto 1”-2” pipes in situations where you cannot access the outer surface. It can hold closet spuds and bath, basin and sink strainers through 2”. It can be used to install or extract Schedule 40 nipples. The jaws expand by eccentric action and are reversible for various sizes.
Lighter weight and closer spacing of cutter wheels, together with simple ratcheting action, give smooth cut on lighter wall pipe. Ratchet-action handle parallel to pipe allows for application in trenches of minimum width. Complete with hand guard to protect operator’s knuckles when cutting. * Do not use more than one chain extension except for clay pipe up to 15"
Pipe Taps: Hand Use Only Share Made from carbon steel in right hand configuration only. These taps are especially suited for restricted area work. All taps have taper of 3/4" per foot. Marked with drill size for pilot hole. Warranty Full Lifetime Warranty
Only 17" (43 cm) long, the Model 226 is perfect for cutting cast iron, cement and clay pipe where space is limited. The Model 226 is especially suited for against-the-wall and other tight quarter applications. From the Model 226’s compact design to its unique chain latching mechanism, every feature has been engineered for maximum productivity.
Handy, portable stand chain vise. Sturdy cast-iron frame. Equipped with pipe rest, pipe bender, and tool tray. 11/4" pipe for legs and connecting pipe not furnished. Instruction Sheet
Pipe Welding Vises Share Made of durable performance-proven material and designed to resist strain, heat and warping during tacking. Machined swivel nuts and pins, together with special chain screws, give smooth and trouble-free assembling of the vise onto pipe. Instruction Sheet Pipe Vise User Guide (1.94 MB)
Manual and electro-hydraulic benders for precision cold bending of standard gas pipes up to 4". Single circuit hydraulic system with return spring for better control of the ram and precise bending. Supplied in a wooden case and delivered with a set of bending formers for standard gas pipe applications and corner supports.
The RIDGID Bi-Metal hole saws have become more cost effective, while delivering maximum cutting performance. Plumber's, Electrician's, General Purpose kits each contain a selection of RIDGID hole saws and hole saw arbors for cutting through wood, plastic, machinable metals, stainless steel alloys, nail-embedded wood cutting. External coating reduces side wall friction for efficient cutting.
The Model RT1000 Mini Tapping Tool is ideal for branching pressurized water lines. With 1" tapping capacity and the ability to drill into most pipe materials, the lightweight compact and corrosion-resistant design of the RT1000 is perfect for branching pressurized pipe when system shut down is out of the question.
Jaw clutch prevents jamming. Simple adjustment for tapered or straight threads. Cam-type workholder sets instantly. Fully enclosed gearing. * Kits include all accessories necessary for threading with a 141 mounted on a 535 with a high-clearance carriage ** Drive bar for 16723 not included Model 141 Geared Pipe Threader Dies
Over-molded handle and contoured grip provide optimal control. Durable die cast gear housing and fiberglass reinforced plastic body to withstand demanding job site conditions. RIDGID die head retaining system is a simple twist and release for the 1 1/2", 2" Die Heads and Die Head Adapter. Lightweight and portable for maintenance, repair and service plumbers.
RIDGID Jaws are developed and manufactured in Switzerland and Germany to the highest standards and in close cooperation with Fitting Manufacturers. These are the best companions to your Press Machine you can have on the jobsite! SUPER RESILIENT - Made of super resilient, Multi-hardened steel for minimum wear and maximum pressing results.
The patented AUTOFEED® self-feeding technology automatically advances and retracts the cable, allowing you to keep your hands clean and off the cable. For tough clogs, switch to drill powered operation for up to 500 RPM of clearing power. Easy Handling - Ergonomic grip handle makes it easier to support the tool while feeding the cable
RIDGID's K-26 drain cleaner tool unclogs traps and bends in sinks, tubs, drinking fountains, lavatories, urinals or vent pipes. Ideal for users seeking excellent performance and value. Slip-resistant collet chuck that grips cable with the flick-of-the-wrist. Rotary molded plastic drum that won’t rust or dent – cleans easily.