Features
- Effortlessly punch up to 4" (100,5 mm) holes in mild and stainless steel without burdensome ratcheting or pumping.
- Compatible with knockout punch dies from RIDGID® and other manufacturers (sold separately).
- Head can be rotated 360° to virtually any orientation to access tight spaces
- Combine with other heads in the RIDGID QuickChange SystemTM to maximize efficiency and productivity on the job site.
Specifications
Capacity | Punches up to 4" (100,5 mm) holes in 12-gauge mild steel and 14 gauge stainless steel |
Interchangeable head is compatible with 6-ton (60 kN) RIDGID electrical tools featuring the QuickChange system | |
Punch head swivels 360° and rotates 360° in the RIDGID QuickChange System | |
Approximate Punch Time | 5 seconds |
Includes | Knockout Punch Head, 2 Draw Bolts, 3 Spacers, 1 drill bit and instruction sheet. Available as an option in an RE6 tool kit or as an individual head. |
Weight | 4.6 lbs (2,1 kg) |
Support Documents
Ordering Information
Catalog Number | Model No. | Description | Weight | |
---|---|---|---|---|
lb. | kg | |||
52078 | PH-60C | PH-60C Swiv-L-Punch Knockout Punch Head Only | 4,6 | 2,1 |
43623 | RE 60 | Electrical Tool Kit w/PH-60B Punch Head | - | 9,5 |
43633 | RE 60 | Electrical Tool Kit w/SC-60C Scissor Cutter, LR-60B Latching Round Crimp Head and PH-60B Punch Head | 24,7 | 11,2 |
55338 | RE 60 | Electrical Tool Kit w/ 4P Indenter Head (diesless crimping), SC-60C Scissor Cutter Head and PH-60C Swiv-L-Punch Head | 32,8 | 14,9 |
Catalog Number | Description | Weight | |
---|---|---|---|
lb. | kg | ||
44058 | Hole Punch ST16 (16,2 mm) | - | 0,06 |
44063 | Hole Punch ST20/PG13 (20,4 mm) | - | 0,10 |
44068 | Hole Punch ST25 (25,4 mm) | - | 0,14 |
44073 | Hole Punch ST32 (32,5 mm) | - | 0,24 |
44078 | Hole Punch ST40 (40,5 mm) | - | 0,38 |
44083 | Hole Punch ST50 (50,5 mm) | - | 0,70 |
44088 | Hole Punch ST63 (63,5 mm) | - | 1,05 |
44093 | Hole Punch PG16 (22,5 mm) | - | 0,10 |
44098 |
9,5 mm Draw Bolt required for ST16/20/PG13/ST25 punches |
- | 0,10 |
44103 |
19 mm Draw Bolt required for ST32/40/50/63 punches |
- | 0,24 |
44108 |
Set of Spacers required for all Hole Punch sizes |
- | 0,29 |
44113 |
Hole Punch Set featuring ST16/20/25/32/40 Hole Punches and Dies, 3 Spacers, 2 Draw Bolts and 1 Pre-drill |
- | 2,00 |
Catalog Number | Model No. | Description | Weight | |
---|---|---|---|---|
lb. | kg | |||
52373 | PH-60C | 3/8” Draw Stud – Swiv-L-Punch Accessory | 0,2 | 0,1 |
Catalog Number | Description | Weight | |
---|---|---|---|
lb. | kg | ||
43323 | 18V Advanced Lithium 2.0Ah Battery | 1,00 | 0,45 |
43328 | 18V Advanced Lithium 4.0Ah Battery | 1,50 | 0,68 |
43333 | 18V Advanced Lithium Battery Charger | 1,90 | 0,85 |