Model 300 Power Drive Complete
Show Less
Read More
Features
- RIDGID® speed chuck.
- Reversible 1/2 HP universal motor.
- Ideal for use with RIDGID roll groovers.
- Heavy-duty proven performance : 1700W Motor.
- Lightweight, portable design at only 115-154 lbs (52-70 kg).
- Fast transport and set-up.
- Self-contained oil system with adjustable flow control.
- Versatility for threading and grooving.
- Quiet operation : 79.5 dB(A)
Specifications
| Recessed Switch | Heavy-duty forward/off/reverse and integral foot switch. |
| Chuck | Speed chuck with replaceable rocker-action jaws. |
| Rear Centering Device | Cam-action turns with chuck. |
| Support Bar | Heavy duty. |
Support Documents
Operator's Manual
300 Power Drive Operator's Manual
(3.22 MB)
Instruction Sheet
300 Power Drive Instruction Sheet
(461.07 KB)
No. 32 Transporter Instruction Sheet
(227.4 KB)
Parts List
300 Power Drive Parts List
(461.25 KB)
Catalog Sheet
300 Power Drive Cat Sheet
(454.48 KB)
Warranty
Ordering Information
| Catalog Number | Model No. | Description | Oiler | Die Head | RPM | Voltage (V) | Frequency (Hz) | Phase | Motor Type | Amp Draw (A) | Power | Weight | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| lb. | kg | ||||||||||||
| 15682 | 300 Complete | 115V, 50/60 Hz (NPT) | 418 | 811A | 36 | 115 | 50 - 60 | 1 | Universal | 15 | - | 212 | 96.2 |
| 15722 | 300 Complete | 115V, 50/60 Hz (NPT) | 418 | 811A | 57 | 115 | 50 - 60 | 1 | Universal | 18 ** | - | 212 | 96.2 |
| 97415 | 300 Complete * | 230V, (NPT) | - | 811A | 36 | 230 | 50 - 60 | 1 | Universal | 8 | - | 202 | - |
| 97420 | 300 Complete * | 230V, (BSPT) | - | 811A | 36 | 230 | 50 - 60 | 1 | Universal | 8 | - | 202 | - |
300A includes automatic oiling
20 Amp Plug
FAQ
-
What are the key specifications of the Model 300 Power Drive Complete?
The 300 Power Drive uses a 1/2 HP universal reversible motor with spindle speeds of 38 RPM (57 RPM available). It features a heavy-duty FOR/OFF/REV switch with an integral foot switch, a RIDGID speed chuck with replaceable rocker-action jaws, rear cam-action centering, and two support bars. The 300 Complete bundles the 300 Power Drive with foot switch, 811A die head, 311 carriage with lever, universal dies (1/2–3/4 and 1–2 in. (15–20 mm and 25–50 mm)), 341 reamer, 360 cutter, 418 oiler, 1452 tray, 1206 stand, and 32 transporter.
-
What threading capacities does it support?
Pipe capacity is 1/2–2 in (15 - 50 mm) standard, with 2-1/2–4 in (65–100 mm) using the 141 geared threader and 4–6 in (100–150 mm) using the 161 geared threader. Bolt threading requires appropriate die sets and heads per the die head selection. These capacities apply to the 300 Power Drive platform included in the Complete system.
-
What are the electrical options and weight?
The 300 Power Drive is available in 115V or 230V single-phase configurations at 50–60 Hz. Power Drive only weight is listed at approximately 94 lb (43 kg). Complete system weight varies by configuration and included accessories.
-
How do I mount the Power Drive on the 1206 stand?
Open the 1206 stand legs and press down the tray until stiff and wobble-free. Mount the 300 Power Drive securely per the operator's manual instructions to prevent tipping. Leg stiffness can be adjusted via the set screw on the tray leg support. Proper stand mounting is required for safe operation.
-
How is the threading carriage and tools installed and set up?
Install the 311A carriage with lever and mount the cutter, reamer, and die head per manual steps. Ensure the cutter and reamer are swung to the rear when installing pipe, set the die head to the correct size, and use the carriage lever to engage tools during operation.